Commercial Roof Replacement & Installation

Commercial Roof Replacement & Installation in Fort Pierce & The Treasure Coast

A commercial roof replacement is a capital investment with decades of consequences. The system you choose, the contractor you hire, and the engineering behind the installation all affect your building’s performance, insurance position, and total cost of ownership for the next 20 to 50 years.

Rhino Roofs provides commercial roof replacement and installation across Fort Pierce, Port St. Lucie, Stuart, Vero Beach, West Palm Beach, and the surrounding Treasure Coast — working with building owners, property managers, HOA boards, and general contractors on full replacements, recover projects, and new construction installations across all commercial roof profiles.

Commercial Roof Replacement & New Installation

Every commercial replacement starts with an honest assessment of the building: substrate condition, drainage configuration, occupancy demands, and capital objectives. We don’t recommend a system before we understand the asset.

New construction

We work with general contractors and developers on new commercial roof installations across all system types, providing shop drawings, Florida Product Approval specifications, and trade coordination for penetration and curb placement during the roofing phase.

Full reroof

A complete tear-off is required when the existing system is at end of life, when subsurface moisture has compromised insulation or decking, or when Florida Building Code mandates it based on existing layer count. Under the Florida Building Code, a commercial recover is permitted only when a single existing layer is present and the substrate is dry. Two or more layers — or evidence of moisture — require full tear-off to the structural deck. We assess substrate conditions with core sampling and infrared thermal imaging before any scope is finalized.

Commercial Flat Roof Replacement — TPO, PVC, EPDM & Modified Bitumen

Roof leaks rarely look the same twice — and the right repair depends entirely on the material system, the failure point, and what’s happening beneath the visible surface. Rhino Roofs diagnoses and repairs all three primary residential roofing systems found across the Treasure Coast.

TPO and PVC single-ply

Are the current standard for most commercial flat replacements. Heat-welded seams create a continuous membrane without adhesive-dependent seam points. White membranes reflect solar radiation, reducing HVAC loads in Florida's climate. PVC is the specification where chemical resistance is required.

EPDM

Is appropriate for large commercial applications where ballasted installation is structurally viable.

Modified bitumen and BUR

Provide multi-ply redundancy and foot traffic tolerance for high-access rooftops and projects where physical depth of waterproofing is the priority.

Tapered insulation

Every flat roof replacement includes a drainage evaluation. Where positive slope is inadequate, we design and install tapered polyiso insulation board systems that create drainage slope from the deck level — eliminating ponding zones that degrade membranes and void warranties.

Commercial Metal Roof Replacement & Installation

Standing seam metal is the long-term performance specification for commercial buildings where durability, wind resistance, and low maintenance over a 40-to-50-year horizon are the drivers. Concealed clip attachment accommodates thermal expansion without stressing fastener points — the mechanism that eventually compromises every exposed-fastener system.
For coastal and waterfront properties, we specify marine-grade alloy fasteners and, where appropriate, aluminum panel systems that eliminate saltwater corrosion risk over a decades-long service life. Every installation includes custom flashing fabrication at all penetrations, curbs, and wall transitions.

Commercial Tile Roof Replacement & Installation

Tile is the defining material for multi-family HOA communities, resort properties, and Mediterranean-style commercial buildings across the Treasure Coast. At the commercial scale — dozens of buildings, thousands of tiles — structural assessment, underlayment specification, and phased scheduling discipline are what separate a successful project from a problematic one. We conduct load assessments across all affected buildings before material is ordered, specify premium underlayment systems appropriate for South Florida’s thermal and UV conditions, and coordinate phased installation schedules with property management to minimize tenant disruption throughout the project.

Commercial Shingle Roof Replacement & Installation

Multi-family communities and light commercial buildings with pitched rooflines require shingle replacement at a scale that demands systematic project management — consistent installation quality across every crew, phased building scheduling, tenant coordination, and portfolio-level insurance documentation. We install HVHZ-rated impact-resistant architectural shingles with secondary water barrier installation and ring-shank re-nailing to Florida Building Code standards across every building in the project. Wind Mitigation Form documentation is provided at completion for the property’s insurance carrier.

Commercial Roof System Reference

TPO / PVC Single-Ply

Primary Advantage

Heat-welded seams; UV reflectivity; ASCE 7-22 compliant

Ideal Application

Warehouses, retail centers, distribution facilities

EPDM

Primary Advantage

Proven long-term flexibility; ballasted option

Ideal Application

Large low-slope commercial assets

Modified Bitumen / BUR

Primary Advantage

Multi-ply redundancy; foot traffic tolerance

Ideal Application

High-access rooftops; projects requiring physical depth

Standing Seam Metal

Primary Advantage

40–50 year lifespan; concealed clip; max wind performance

Ideal Application

Coastal commercial, municipal, and industrial

Commercial Tile

Primary Advantage

Architectural character; 30–50 year life; individual tile serviceability

Ideal Application

HOA, resort, and Mediterranean commercial

Commercial Shingle

Primary Advantage

HVHZ rated; wind mitigation eligible; cost-accessible

Ideal Application

Multi-family, apartments, and light commercial

Florida Building Code & Wind Load Compliance

ASCE 7-22 requires fastening patterns calculated separately for field, perimeter, and corner zones based on your building’s geometry, height, and coastal exposure category. We use manufacturer-approved uplift calculation tools and, where project scope requires it, work with licensed engineers to confirm compliance before installation. Florida Product Approval codes are documented for every installed material — membrane, insulation, fasteners, and flashings — as part of the permit package and permanent building record. Secondary water barriers and Notice of Commencement filing are managed as standard components of every commercial replacement project. You don’t navigate the St. Lucie County building department.

The Commercial Replacement Process

Step 1

Assessment & Scope . Substrate condition, drainage, and structural load are evaluated. A complete replacement scope with material specifications and wind uplift engineering is developed before anything is recommended.

Step 2

Safety Mobilization. OSHA-compliant fall protection, debris containment, and pedestrian safety are established before crews arrive. Property managers and tenant contacts receive a project schedule before work begins.

Step 3

Tear-Off & Deck Conditioning. Existing roofing is removed to the structural deck. Deck condition is assessed and structural repairs completed before new material is applied.

Step 4

System Installation. Insulation, membrane, and roofing material are installed per manufacturer specifications and Florida Building Code. All seams are hot-air welded on flat systems. Flashings and edge metal are custom fabricated to ASCE 7-22 perimeter requirements.

Step 5

Inspection, Warranty & Closeout. On qualifying installations, a manufacturer field representative conducts a quality audit before the NDL warranty is issued. Final deliverables include permit closeout, Florida Product Approval records, warranty registration, and wind mitigation documentation.

Commercial Roofing Service Areas — Fort Pierce & The Treasure Coast

Fort Pierce, FL

Our home base; full commercial replacement and new installation

Port St. Lucie, FL

Commercial reroof for retail, office, and industrial properties

Stuart, FL

Replacement with engineering and code compliance documentation

Vero Beach, FL

Office, medical, hospitality, and multi-family commercial roofing

West Palm Beach, FL

Commercial replacement for Palm Beach County properties

Jensen Beach, FL

Coastal commercial with marine-grade specifications

Palm City, FL

HOA community roofing programs and commercial replacement

Hobe Sound, FL

Commercial replacement and new construction

Sebastian, FL

Full commercial roofing across all system types

Hutchinson Island, FL

Coastal and resort property roof replacement

Kings Highway Corridor & St. Lucie County Industrial Parks

Large-scale warehouse, manufacturing, and distribution roofing

A commercial roof replacement done right is a decades-long decision.
It deserves to be made carefully.

Rhino Roofs is ready to give you a thorough site assessment and a clear, documented recommendation — no pressure toward any particular system, just accurate information and honest guidance.

Frequently Asked Questions

How much does residential roof repair cost in Fort Pierce?

An NDL — No Dollar Limit — warranty is issued by the roofing system manufacturer and covers 100% of labor and material costs for covered failures with no financial cap. It requires installation by a manufacturer-certified contractor and passes a field inspection at project completion.

How does tapered insulation improve a flat roof replacement?

Tapered polyiso boards create positive drainage slope across an otherwise flat deck, directing water to drains and scuppers rather than allowing it to pond. Eliminating ponding extends membrane life and maintains manufacturer warranty validity.

When does Florida Building Code require full tear-off versus a recover?

A recover is permitted only when a single existing roof layer is present and the substrate is dry. Two or more existing layers, or subsurface moisture, require complete tear-off to the structural deck before a new system can be installed.

How do you manage replacement on an occupied commercial property?

Phase-based scheduling limits open roof area at any time. Daily schedules are coordinated with property managers and tenant contacts. Site-specific operational plans are developed before mobilization for sensitive environments — medical, food service, or customer-facing retail.

TESTIMONIALS

I just had my roof replaced from Rhino roofing. My home is on Avenel lane in the PGA Village. I’m very satisfied on their promptness and quality of work. Ronnie, the project manager, was with me every step of the way. He made the experience worry free! Let’s face it.. it’s a huge investment.. and him picking up the phone and answering my questions Was wonderful.

had a wonderful experience with the company, no surprises. Carl, the sales rep is professional, on time and answered all my questions even after hours. I would definitely recommend Rhino Roofs. But most if all my roof looks beautiful.

My experience with Rhino Roofs was very good, my sales person was Phil who is very knowledgeable,and answered all my questions. I would recommend this company to anyone.

Ronnie was absolutely amazing from start to finish. Whenever I had a question he had the answer. Always answered text messages or calls within minutes of me contacting him. There were a few discrepancies with the project and he handled immediately. I definitely would recommend Rhino Roof for your project💕💣

Recently had the pleasure of working with Rhino, and I cannot recommend them enough! They were incredibly helpful, professional, and kind from the first call. Their team went above and beyond to answer all of my questions and make sure I understood the entire process, which made me feel confident and informed every step of the way. If you're looking for a roofing company that is reliable, hardworking, and genuinely nice to work with, look no further. I will definitely be recommending them to friends and family!